SKW steel metallurgy
SKW Metallurgy Steel shares have are great NachholbedarfNach heavy investment in new plants at SKW steel metallurgy now rising profits on. The stock is cheap and has high potential to catch up.
The euro debt crisis is forgotten. At least it does in the stock market like this. After the gains of the Dow vergangnene days listed again almost at the level of the end of July last year he was locked up.
The small caps in the MDAX and SDAX have achieved their pre-crisis almost. 20 percent decline in the other hand, is still SKW steel metallurgy. And compared to the price level by the end of 2010, the difference is even 30 percent.
The stock is in our opinion, significant catch-up potential. Because the shops in the SDAX member running around. In the first nine months of the specialty chemicals group increased its products for the steel industry - for example, filled with special chemicals or solutions for hot metal desulphurization wires - its sales by 13.8 percent to 324.7 million euros. The group from Unterneukirchen in Bavaria benefited from the growth of global steel production. This was the end of September by 8.2 percent over the previous year.
structural steel suppliers
manufacturers, distributors and structural steel suppliers.
Saturday, July 28, 2012
Friday, December 9, 2011
Thyssen-Krupp: Stainless steel shines no more
STEEL INDUSTRY
The steel giant Thyssen-Krupp Steel shut down its production. The work for this holiday are extended from two to four weeks.
HB DUSSELDORF. Germany's largest steelmaker ThyssenKrupp extended because of the decline in demand for its steel plant shutdown to four weeks. In the stainless works Benrath Dusseldorf, Bochum and Krefeld, stood the tapes two weeks longer than usual silence, a spokesman for ThyssenKrupp Stainless, said on Tuesday.
Salary the employee would have to work because of the holidays from 15 December to 11 January but not without. The halt in production will offset against outstanding holiday and overtime work, the spokesman said. What is the extent of the decline in demand for steel has, he did not want to say with reference to the Group's balance sheet press conference on Friday.
The steel giant Thyssen-Krupp Steel shut down its production. The work for this holiday are extended from two to four weeks.
HB DUSSELDORF. Germany's largest steelmaker ThyssenKrupp extended because of the decline in demand for its steel plant shutdown to four weeks. In the stainless works Benrath Dusseldorf, Bochum and Krefeld, stood the tapes two weeks longer than usual silence, a spokesman for ThyssenKrupp Stainless, said on Tuesday.
Salary the employee would have to work because of the holidays from 15 December to 11 January but not without. The halt in production will offset against outstanding holiday and overtime work, the spokesman said. What is the extent of the decline in demand for steel has, he did not want to say with reference to the Group's balance sheet press conference on Friday.
Monday, September 5, 2011
Automated Plasma Cutting Center operates quietly and intelligently
Esab Cutting Systems
With the plasma cutting Esab Cutting Systems Center Autorex is still a powerful new complete package for process-safe automatic application of plasma technology. The modular configuration of the system is not only versatile and powerful, but by extreme noise reduction and glare control devices leading the way in terms of environmental protection and occupational safety.
Automated Plasma Cutting Center operates quietly and intelligently
Autorex is a powerful complete package for process safety application of plasma technology for thermal cutting.
Plasma is particularly suitable for cutting mild steel. (Based on Autorex) The impressive cost-benefit ratio, high cutting speeds, with about 35,000 mm / min and high-quality results open up new potential in this area in production.
Plasma cutting as an alternative to laser cutting
With the plasma cutting Esab Cutting Systems Center Autorex is still a powerful new complete package for process-safe automatic application of plasma technology. The modular configuration of the system is not only versatile and powerful, but by extreme noise reduction and glare control devices leading the way in terms of environmental protection and occupational safety.
Automated Plasma Cutting Center operates quietly and intelligently
Autorex is a powerful complete package for process safety application of plasma technology for thermal cutting.
Plasma is particularly suitable for cutting mild steel. (Based on Autorex) The impressive cost-benefit ratio, high cutting speeds, with about 35,000 mm / min and high-quality results open up new potential in this area in production.
Plasma cutting as an alternative to laser cutting
Thursday, December 2, 2010
ArcelorMittal is struggling with lower demand and commodity prices
ArcelorMittal is struggling with lower demand and commodity prices
The world's largest steel producer ArcelorMittal is struggling with a decline in demand while high commodity prices. "We are disappointed with the recovery process," said Louis Schorsch, head of the American division for flat products, on Thursday. In the third quarter, demand for steel has decreased by 6% worldwide. The purchasing managers in the developed countries held back before replenishing the stocks, he said.
The world's largest steel producer ArcelorMittal is struggling with a decline in demand while high commodity prices. "We are disappointed with the recovery process," said Louis Schorsch, head of the American division for flat products, on Thursday. In the third quarter, demand for steel has decreased by 6% worldwide. The purchasing managers in the developed countries held back before replenishing the stocks, he said.
Monday, August 23, 2010
EF-Drill produces high-quality core holes
Emuge expanding its solid carbide twist drill program
EF-Drill is suited for drilling operations STEEL up to 8 x D and EF-Drill VA for the machining of austenitic stainless steels to DIN 6537 short (3 x D) and long (5 x D).
The newly developed geometry of the EF-Drill from Emuge to create the necessary conditions for an economic and reliable production of internal threads. The basis for this is to create a quality core hole drilling.
The geometry approach with the series steel (STEEL), stainless steel (VA), cast iron (GG) and hard materials (HCUT) there was previously only for taps and taps. Now the manufacturer has applied to the
EF-Drill is suited for drilling operations STEEL up to 8 x D and EF-Drill VA for the machining of austenitic stainless steels to DIN 6537 short (3 x D) and long (5 x D).
The newly developed geometry of the EF-Drill from Emuge to create the necessary conditions for an economic and reliable production of internal threads. The basis for this is to create a quality core hole drilling.
The geometry approach with the series steel (STEEL), stainless steel (VA), cast iron (GG) and hard materials (HCUT) there was previously only for taps and taps. Now the manufacturer has applied to the
Monday, June 14, 2010
carbon steel suppliers
Steel has a carbon content. This carbon content can vary and let the properties of steel differ. Carbon changes hardness of steel. It can also make steel more brittle. To find out more about carbon steel visit carbon steel.
Wednesday, March 3, 2010
Making, Shaping and Treating of Steel
Making, Shaping and Treating of Steel (Iron Making) focusing entirely on steelmaking and refining processes, emphasizes the important developments that contributed to the improvements in increased quality and productivity realized by the steel industry in the last ten years. In particular, the chapters on EAF steelmaking and ladle and secondary
Subscribe to:
Posts (Atom)